OCP3D OLD CAR PROBLEMS START AN
ENQUIRY

OEM identity under investigation · Application under investigation

Sun Visor Retaining Clip

A working record, not a sales page.

The final tan v12 sun visor clip installed on the headliner of the founder's Supra.
V12 · tan ASA · installed Sept 8
The tan v12 clip on the headliner above the windshield, seen from further back.
V12 · in the car
The tan v12 clip on the print bed inside the enclosed printer.
V12 · on the print bed · Sept 8
A boxy orange v8 clip beside the smoother tan v12, both on the same headliner.
V8 orange vs V12 tan
The original clip beside a ruler on the measuring bench.
The original · measured

WHERE THIS PART STANDS

Only what the record shows: no fit, strength or availability claim beyond it.

Measured
  1. Requested
  2. In development
  3. Measured
  4. Fitted on a real car

Measured crescent-wedge/C-hook visor retainer with a fir-tree mounting pin, copied from the founder's physical A60 part. Its exact Toyota OEM identity is under investigation. An earlier 74348-12010 assignment is now quarantined: MA61 section MBC673D and an exact-number reproduction both show 74348 as a conventional screw-mounted visor holder, which does not match this object. Adjacent diagram family 74336, "CLIP, VISOR ARM SET," is the leading candidate only; no matching orderable number or verified donor has closed that identity. The stable case-file slug and physical measurements remain valid independently of the number.

Read the build log →

OEM number under investigation. An earlier number didn’t match this part, so none is published until the mounting and donor evidence agree.

MEASUREMENTS

Dimensions on record.

Critical dimensions — confirmed 20 of 21 (every confidence level stays visible)
DimensionmmConfidence
counterbore_depth 7 CONFIRMED
depth_at_back 10.61 CONFIRMED
depth_at_middle 15.04 CONFIRMED
hook_depth 25.4 CONFIRMED
hook_inner_diameter 8.1 CONFIRMED
hook_throat_opening 7.52 CONFIRMED
hook_wall_thickness 5 CONFIRMED
jaw_end_pull_in 3 CONFIRMED
jaw_ledge_depth 8.33 CONFIRMED
overall_length 36.385 CONFIRMED
overall_width 20.62 CONFIRMED
peg_to_hole_edge_gap 9 CONFIRMED
pin_barb_count 6 CONFIRMED
pin_barb_max_diameter 5.34 CONFIRMED
pin_core_diameter 3.07 CONFIRMED
pin_first_barb_offset 1 CONFIRMED
pin_protrusion 14.21 CONFIRMED
pin_smooth_side_diameter 4.98 CONFIRMED
screw_hole_diameter 6.05 CONFIRMED
screw_hole_edge_offset 9.17 CONFIRMED
total_height_incl_pin 39.61 STANDARD_INFERRED
NEXT ACTION
Discuss this measured part Measured, not yet fit-confirmed. Tell me about your car and we can talk it through.

OCP3D part record · OEM № pending