OCP3D OLD CAR PROBLEMS START AN
ENQUIRY

EXISTING DESIGNS / THEIR ACTUAL STATUS

Parts & projects.

What’s on the bench, and where each part stands.

A printed adaptor on the original wiper arm, holding a Rain-X blade connector.
Adaptor + Rain-X connector · Sept 20
A printed adaptor mounted on the end of the original wiper arm, with the blade attached.
On the original arm · Sept 20
A modern blade resting along the windshield on its printed adaptor, next to the red hood.
Blade at rest · Sept 20
The original driver-side wiper carrier on the end of the arm, next to a scale bar.
The original carrier

IN LONG-TERM TESTING · NOT FOR SALE

PART
A60 Wiper Blade Adaptors
CAR
Safety review open — no vehicle claim
FOR SALE
No, still testing
STATUS
IN LONG-TERM TESTING

In long-term testing. Not for sale until testing is complete.

Follow the testing
20 DIMENSIONS
The final tan v12 sun visor clip installed on the headliner of the founder's Supra.
V12 · tan ASA · installed Sept 8
The tan v12 clip on the headliner above the windshield, seen from further back.
V12 · in the car
The tan v12 clip on the print bed inside the enclosed printer.
V12 · on the print bed · Sept 8
A boxy orange v8 clip beside the smoother tan v12, both on the same headliner.
V8 orange vs V12 tan
The original clip beside a ruler on the measuring bench.
The original · measured
PART
Sun Visor Retaining Clip
CAR
Application under investigation
OEM №
OEM identity under investigation
STATUS
MEASURED · 20 DIMS
  1. Requested
  2. In development
  3. Measured
  4. Fitted on a real car
See the measurements