IN LONG-TERM TESTING · Exterior/cyclic work — no vehicle claim

A60 Wiper Blade Adaptors

A working record, not a sales page.

A printed adaptor on the original wiper arm, holding a Rain-X blade connector. — Adaptor + Rain-X connector · Sept 20

A printed adaptor mounted on the end of the original wiper arm, with the blade attached. — On the original arm · Sept 20

A modern blade resting along the windshield on its printed adaptor, next to the red hood. — Blade at rest · Sept 20

The original driver-side wiper carrier on the end of the arm, next to a scale bar. — The original carrier

IN LONG-TERM TESTING · NOT FOR SALE

WHERE THIS PART STANDS

Only what the record shows: no fit, strength or availability claim beyond it.

IN LONG-TERM TESTING

In long-term testing. Not for sale until testing is complete.

A60 wiper-carrier-to-modern-blade adaptor investigation. Work to date includes labelled review geometry and measurement-gauge paths across front-driver, front-passenger, and rear arrangements. This is not a product, fit claim, installation recommendation, or road-use claim. The next evidence is final vibration, UV-exposure, and rain-functionality testing—alongside the remaining physical interface and controlled bench evidence—before any service or availability discussion.

Read the build log →

Final testing is still pending. This exterior adaptor needs vibration, UV-exposure and rain testing, plus the remaining interface measurements, before any product, installation, fit or road-use discussion.

MEASUREMENTS

Dimensions on record.

NEXT ACTION

Follow the testing Not for sale while testing continues. Results go in the build log.

OCP3D part record · In long-term testing — not for sale